Numerous Indian homeowners complain about damaged walls with the onset of the monsoon season. To prevent damp walls is on the minds of every homeowner — an all-important task meant to be completed before leakage due to the rains wreaks havoc on homes. During the rainy season, moisture seeps through the exteriors of the house and causes internal wall dampness. This dampness in wall issue faced in almost all homes can result in peeling paint, leakage and also makes your home feel cold and dank. Often, these patches remain long after the rainy season has passed. Moulds and fungus on walls due to rains can also cause health issues.  

Prolonged exposure to moisture can do serious damage to your walls and to the structure of the house, so it’s essential to prevent damp walls effectively.

What Causes Wall Dampness?

wall-dampness-cracked-wall
Blocked pipes can cause water damage to walls

Here are a few ways that the dampness in wall problem can occur in your house.

  • Moisture from the ground can rise above ground level and damage walls
  • Splashing rain water can cause walls to dampen
  • Sloping roofs can collect water that can percolate into the home and cause cracks
  • Blocked drainage pipes can collect water and cause damp walls

How To Prevent the Dampness in Wall Problem?

Here are three quick and easy wall water leakage solution ideas to prevent damp walls:

Check for Any Cracks in the Walls and Seal Them

prevent-damp-walls-putty
Prevent seepage in wall cracks by filling them in with putty

Over time, the walls of your house can develop cracks, which typically start near the door and window frames. These cracks allow moisture to get into the structure of your building and cause damp patches and wall seepage. Thus, the water leakage solution for walls here is to fill them with crack-fill putty. Once the gaps and cracks are filled, all the loose plaster must be removed and the wall repainted. Just make sure you do this before the monsoon starts.

Waterproof the External Walls and Roof

wall-dampness-waterproof
Apply waterproof coating on your external walls and roofs

Many exterior paints used on buildings are permeable and allow water to seep from into the interior walls. To prevent water seepage in walls, exterior waterproofing coats are required to be applied on the external walls. A waterproof coat will create a barrier to the rainwater and moisture, and prevent damp walls in your home.

Waterproofing the roof is another suggestion for the question of how to treat dampness in internal walls. The terrace is exposed to harsh weather conditions and water easily accumulates on the surface, resulting in leakage and damp patches on the interiors. Roofs should ideally have a waterproof roof coating that acts as a sealant and prevents seepage of water.

Install a Damp-Proof Course

prevent-damp-walls-waterproofing
Prevent groundwater from adding to your wall dampness woes

Sometimes you will notice wet patches all along the lower portion of your walls, close to the skirting.

A damp-proof course is a preventive measure to stop groundwater from rising up through the walls of your house and resulting in wall seepage. In a damp-proof course, a preventive barrier of an impervious material (something that doesn’t allow water to pass through) is constructed into the brick wall about 150mm above ground level. This prevents any moisture from the ground from rising through the walls and causing damage.

Most buildings are usually constructed with a damp-proof course in place. However, if you’ve noticed damp patches on the lower portion of your walls, the course may need replacing. This is an intensive job that needs to be done by a professional. Therefore, it’s best to get a professional to evaluate the damage and replace the damp-proof course if necessary.

Remember to keep your home well-ventilated during this season. Take quick steps to remove any mould or fungus on walls due to rain as their presence can cause respiratory issues. If you notice excess moisture or deep cracks in your walls, consult a professional immediately to prevent damp walls.

What Is Guniting and Pressure Grouting and Why Is It Important To Prevent Wall Dampness?

Guniting: It refers to the process of spraying a layer of concrete mixture onto pipes and walls, making it waterproof.


Pressure Grouting: This process refers to applying a mixture of cement and sand with a jet into cracks, voids or fissures present in a structure.

ALSO READ: Get your home monsoon-ready with these 8 simple steps.

How Can Livspace Help You? 

We hope you found our ideas useful! If you are looking for aesthetic and functional interior design solutions, then look no further. Book an online consultation with Livspace today. Did we miss out anything? Let us know at editor@livspace.com